We use a premium heavyweight 13 oz. scrim vinyl banner. It has a very smooth surface for best printing results. This material is typically used for billboards, building wraps, banners, event flags, trade show signage, parades, etc.
Please Note: JAN 1st 2018 FedEx and UPS have changed their oversized fees. As a result, All banners over 89″ (7’5″) on their shortest side will be folded and shipped in a square box. All banners 89″ (7’5″) and under on their shortest side will be rolled and shipped in standard corrugated boxes.
Features:
- Single piece maximum size 10’ x 145’ w/o pocket and 9.5’ x 145’ w/ pocket
- Oversize will be welded together
- High resolution digitally printed at 720 x 720
- More optional finishing available
- Indoor and outdoor use, waterproof and UV safe
- Double sided banners are two banners sewn back to back
Material:
- 13 oz. Matte Vinyl Banner
FAQ:
A: Your submitted graphic should fit the dimensions of the print you ordered. There is no additional bleed required. There will be a hemline across the graphic, it will be 2″, 3″, or 4″ from the edge of the graphic depending on what sized pole pocket you order.
A: Please see our recommendation below:
- 2” pole pocket accommodates 1” diameter pole and under
- 3” pole pocket accommodates 1.5” diameter pole and under
- 4” pole pocket accommodates 2” diameter pole and under
A: You can store pickup any size of your banner order. Sizes up to 96″ will be rolled and sizes over 96″ will be folded.
A: We suggest all grommets be used during installation to prevent damages to the banner.
A: Whether you are ordering a street banner, large banner, or a long time use banner it is suggested to have the following additional finishing options selected:
- Webbing
- Reinforced Corners
- In addition to the finishing options it is suggested all grommets to be used upon installation.
A: We offer 9 optional finishings for your needs:
- Hem (free)
- Grommet (free)
- Pole pocket
- Windslit
- Webbing
- D-ring
- Reinforced corner
- Rope
A: Minimum size for Vinyl Backlit Banner is 12.5 sq.ft. or a minimum charge of $50.
A: To conform to most City requirements we include:
- Double Stitched Hem (free)
- Grommet at each corner – total of 4 (free)
- 2″ Pole pockets top and bottom (free)
- Windslits (optional)
A: Please see our recommendation below:
- 2” pole pocket accommodates 1” diameter pole and under
- 3” pole pocket accommodates 1.5” diameter pole and under
A: 1” optional velcro include both loop and hook and 2” optional velcro include loop only.
A: Fabric can be machine washed with cold water and gentle cycle. Lay flat or hang to dry. Wrinkles or creases can be eliminate with hand steamer. Do NOT bleach, tumble dry, or iron.
A: For light box, our translucent vinyl work best with white acrylic, clear acrylic is not recommended.
A: Hp PVC-free Wall paper has a water reactive glue backing. Easy to install and remove with just water.
A: Overlap is recommended for easier installation.
A: At this time that is the maximum size available for our magnets. If you do need to go larger we recommend splitting the artwork into 2 smaller pieces.
A: Both options are free of charge
A: All free graphic(s) are installed, and ready to use.
A: All free graphic(s) are installed, and ready to use.
A: We print directly on the Backlit film to ensure the color will last as long as the material itself.
A: Backlit film is used mainly for light boxes.
A: We offer gloss finish only at this moment.
A: No, our Window Cling material relies on static electricity. It is recommended apply this material to window glass.
A: It is 9pt paper poster.
A: This material does not have any adhesive. It can be installed with double sided tape or push pins.
A: Overall thickness is 13 mil.
A: Product ships rolled in a tube.
A: No, We do not recommend popup use as retractable insert.